High Quality and low cost mitsubishi mitsubishi plc FX2-48MR programming cable
Product Specification
| Manufacturer Series | FX2N-48MR |
| I/O Points | 24 |
| Output Type | Digital |
| Brand | Mitsubishi |
| Current | 0.5 A |
| Type of Input | Sink/Source Selectable |
| Type of Output | Relay Output |
| Input Power | AC100 ~ 240V +10%/-15%,50/60 Hz |
| Dimensions | 87x90x130 (mm) / 3.4x3.5x5.12 (inches) |
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S
basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX2N-48MR-001.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017) FX2N-48MR-001.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program. Analog input points: 4 points (thermocouple, PT, constant voltage input).
Output points: transistor output 4 points, 4 point CT input.
Weight: 0.4KG.
Temperature sensor with 4CH input control output,
Double position control, standard PID control,
Heating and cooling PID control, cascade control.
By using the combination of thhe analog output module,
PID control of voltage or current can be realized FX2N-48MR-001.
New with cascade control. Through the master / slave station of the 2 controllers,
According to the temperature change caused by external disturbance, the tempperature can be adjusted quickly FX2N-48MR-001.
Can connect FX3GA/FX3G, FX3GE, FX3U series.
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-IPS-5V.
